Thanks jat1.
Here are some notes for everyone -- can jadoo/urbanlegend/ali change the name of this topic to say "T-Series AND Silver Media vs. Gold Media"
Looks like the one advantage silver media has over gold is "increased reflectivity"
http://www.supermediastore.com/dvdmediafaq.htmlQuote:
What does it mean by Gold, Silver, Blue DVD-R?
A: Usually using the industry standard the Gold, Silver, and Blue DVD-R are referring to the non-recording surface of the DVD media. Such as Optodisc Gold, Optodisc Silver and Optodisc Blue. In many cases it is an additional layer that is printed on the DVD-R disc by the manufacture. It is only there so that consumers may be able to write on the disc using a magic marker or pencils.
http://www.mam-a.com/technology/technic ... _gold.htmlQuote:
MAM (brand) Silver & Gold CD-R are of the same quality, but there are some differences in "performance". Gold media has a much longer expected lifetime than silver. Many people use the gold for archival applications to ensure the longest life possible. Some audio professionals prefer the gold because it "sounds better".*
The silver media has a slightly higher reflectivity than gold (70% vs. 75%), but except in rare cases, there is no functional difference. (Some players/readers use older pickups & don't deal with CD-R media very well, so the higher reflectivity helps).
http://www.prodisc.com.au/Articles/CDan ... fault.aspxQuote:
A gold or silver reflective layer is applied under a vacuum. This layer reflects the laser beam when reading the CD. For economic reasons, silver has gradually replaced gold so as to reduce the cost of the end product as well as increase the reflectivity.
Nevertheless, CD-RÂ’s with silver rather than gold layers have a shorter lifespan.
http://hardware.slashdot.org/article.pl ... 2&from=rssQuote:
"Unlike pressed CDs/DVDs, 'burnt' CDs/DVDs can eventually 'fade,' due to five things that affect the quality of CD media: sealing method, reflective layer, organic dye makeup, where it was manufactured, and your storage practices (please keep all media out of direct sunlight, in a nice cool dry dark place, in acid-free plastic containers; this will triple the lifetime of any media)."
http://adterrasperaspera.com/blog/2006/ ... val-media/Quote:
The silver and aluminum alloys used in virtually all blank CD/DVD media has one major issue, requiring the manufacturer to lacquer a protective seal over the entire disc: silver and aluminum oxidize when they hit air, turning the normally reflective layer into silver or aluminum rust. Some (very expensive) media uses gold instead which doesn’t oxidize, however DVD media cannot use gold due to design issues (not true anymore, see update below). Today, only the cheapest of the cheap media has severe issues with sealing practices (as such, avoid any media made outside of Japan and Taiwan; especially avoid media made in India.
That said, I recommend Taiyo Yuden media across the board. Taiyo Yuden currently manufactures 52x CD-R, 16x DVD-R, and 8x DVD+R media in normal shiney silver, inkjet printable, and thermal printable forms. Taiyo Yuden may be one of the most expensive (if not the most expensive), but their media quality is unsurpassed. Taiyo Yuden (currently) does not produce any dual layer media. Also, as I mentioned earlier, I recommended buying from SuperMediaStore.com as they are the only online US distributor that guarauntees that their Taiyo Yuden media is certified as coming from Taiyo Yuden.
However, for those that absolutely require dual layer media, Verbatim produces DVD-R DL and DVD+R DL, however, due to the fact DL media costs over twice as much as two single layer discs, I recommend you only use single layer unless you really, really need a single disc.
So, what am I using? Due to Taiyo Yuden’s superior media quality, and DVD+R’s superior design, I use only Taiyo Yuden DVD+R media. I recommend this media to everyone who wishes to keep their data for a long, long time.